Hamer 600NW Net Weigh Bagging Scale
The Hamer 600NW Net Weigh scale is an extra-durable, well-engineered scale
designed for fast, accurate product weighing. This design allows a
simplex (single-head) scale to replace many older-design duplex
(two-head) scale systems without loss of speed or accuracy!
The 600NW is well suited for weighing free-flowing to semi-free flowing materials.
May be equipped with gravity, belt, and vibratory product feeders.
Typical applications include: Salt, Ice Melt, Calcium
Chloride, Fertilizer, Prill, Landscape Stone, Dry Sand, Pet
Food, Grain, Wood Pellets, Feed Corn, Coal Pellets, Granular
Stone, ...
- Main Scale Assembly Built with 2" x 2" Tubular Steel
- Heavy Gauge Steel Used Throughout - Almost 2X as much Steel as other Scales
- Fully Enclosed Frame with Easily Detachable Side Panels for
Easy Access
- Digital Readout Operator Station - Rice Lake 920i Digital Weight Indicator
- Programmable Controller Displays Scale Weights, Target Tolerances,
Surge Bin Fill Status
- Memory for up to 100 Pre-set Product Formulas
- RS-232/485 Communications out put to printers, other devices
- Dual, Direct-mount Load Cell Design for Maximized Signal Strength,
Accuracy & Speed
- Mechanically Damped Single Point Load Cells Direct Mounted To Weigh Bucket
- Real Time, Micro-Second Sensing of Product Loading
- Program Stabilization for Increased Accuracy and Weighment Speed
- 20” X 20” Weight Bucket for Fast Filling and Instant Discharge
- Rugged, Air-operated Weigh Hopper Doors Designed for
Long Operational Life
- Steep Weigh Hopper Door Angle Ensures Fast Product Discharge, No Residue
- ¼” Plate Steel Weigh Bucket Doors With ½” Reinforcements
& Replaceable Seals
- Controller is UL, CUL, OIML and NTEP Approved
- 4" Dust Collection Port - Standard
- Scale Frame and Enclosure are Epoxy-painted Carbon Steel
- Simplex (Single-scale) & Duplex (2-scale) Configurations
- 304 Stainless Steel Contact Surfaces
- Full 304 Stainless Steel Construction (Frame and Contact Parts)
- Integration with Automatic Baggers
- Servo-controlled Product Feed for Increase Speed
- Hermetically Sealed Load Cells
- NEMA 4X 304SS Controller Enclosure
- NEMA 4/IP66 Washdown Construction
- High / Low Level Monitors for Surge Hopper
- Support Structure with Surge Hopper and Operator Platform
- Transition Chutes from Scale to Bagger / Bag Spout
- Bag Spouts and Bag Clamps
Material Type
Free to Semi-Free Flowing
Feed Method
Gravity, Belt, &/or Vibratory
Weighment Range
10 to 110 Pounds
Accuracy**
+/- 0.5 oz @ 2 Sigma
Speed (Maximum)**
24+ BPM (
Weigh Hopper Capacity (Volume)
2.0, 3.5, and 4.0 Cu. Ft.
Pneumatic
8 cfm @ 80 PSI
Electrical (Controller)
110 Volts / 60 Hz / SiNgle Phase
Electrical (Gravity Feed)
110 Volts / 60 Hz / SiNgle Phase
Electrical (Belt or Vibratory Feed)
230 Volts / 60 Hz / Three Phase
** Accuracy and Speeds vary with Product Characteristics (Call for a product evaluation)