Header Logo
Heat  Sealing  Equipment  for  Mil-Spec &  Industrial  Bag  Packaging  Applications

Heavy-Duty "HD" Long Line Impulse Sealers

The HD Series Thermal Impulse Bag Sealers are industrial quality machines constructed from welded steel.  All HD sealers are pneumatically powered and designed to provide an airtight / watertight seal.  Each bag sealer unit features a low pressure safety close and redundant emergency stop features.  These sealers can be constructed as tabletop units or stand-alone units with seal lengths up to 300 inches.

Each bag sealer is ideal for sealing ranges of material including polyethylene, laminated films, nylon and even Teflon.  Sealers are available in either standard thermal impulse or with repeatable and verifiable controls for medical or specialty applications.

Suitable for a variety of heat-sealable

pouch and bag packaging films!

HD-48 Impulse Sealer Photo

Machine Features

  • Heavy-Duty Impulse Sealer for Sealing Wide Materials
  • Rugged Design Pneumatically Actuated Sealing Jaw & 1/4” Seal Width (Standard)
  • High-Pressure Aluminum Seal Bar with Pneumatic Actuation (0- 160 pounds)
  • Open-back, Feed-through Design with 2-3” Opening Between Seal Bars
  • 11” Work Surface on Each Side of Sealing Jaw
  • Pressure Gauge and Regulator
  • Digital Variable Heat & Cool Timers (0.001 sec to 999.9 hours)
  • Seal Cycle is Triggered with Tap-to-Start Foot Pedal
  • Low-pressure Safety Descent of Sealing Jaw
  • Master On/Off Illuminated Power Switch
  • Provides Airtight and Watertight Seals
  • Heavy-Duty Construction - Free-standing Unit with Locking Casters
  • Finish: Durable Blue Powder Coat, Suitable Industrial & Clean Room Use
  • Redundant Emergency Stop Buttons (E-stops)
  • Includes Two-year Warranty, Operating Instructions, and Basic Spare Parts Kit

Options / Accessories

  • Standard Industrial or Validatable Medical
  • 1/8", 3/8" or ½" Wide Flat Band Heating Elements
  • Stainless Steel Construction with Validatable Medical Sealing Controls
  • Dual Heating Elements (Heating in Both Sealing Jaws)
  • Automatic Cycling of Seal Jaw
  • Water Cooled Sealing Bars
  • Water Chilling System
  • Emergency Stop Button(s)
  • Round Wire Cut-off
  • Cold or Hot-wire Cut-off
  • Trim Scrap Blow Off
  • Pneumatic Flying Knife Bag Cutter
  • Opti-Touch Safety Switches (OSHA Approved Tie-down Proof)
  • Electric: 220 Volts / 60 Hz / Single Phase
  • Custom Options Available

Machine Specifications

Seal Width
1/4" Standard
Seal Bar Length
Up to 300"
Compressed Air Required
120 to 240 Volt / 60 Hz / Single Phase